- GST No. 09AAHCS2336R1ZP
- Send SMS
- Send Email
Fuel Hoses
| Business Type | Manufacturer, Exporter, Trader |
| Temp. Range, °C | -50 / 200 |
| Compression Set | Fair/Good |
| Strength Properties | Fair |
| Low Temp. Prop. | Excellent |
| Abrasion Resist | Poor |
| Gas Permeability | Fair |
| Weather Resist. | Excellent |
| Water Resistance | Excellent |
| Ozone Resistance | Excellent |
| Mineral Oil Resist. | Excellent |
| Chemical Resist. | Fair/Good |
| Flame Resistance | Excellent |
| Heat Resistance | Excellent |
Preferred Buyer From
| Location | Worldwide |
Fluorosilicone is a widely used elastomer that can be compounded to meet a wide range of applications. The mechanical and physical properties are very similar to silicone rubber. However, fluorosilicone offers improved fuel and mineral oil resistance but poor hot air resistance when compared with silicone. This material is widely used in semiconductor Ashing equipment for its resistance to oxygen plasma.
| Business Type | Manufacturer, Exporter, Trader |
| Compression Set | Good |
| Phys. Strength | Good |
| Low Temp. Prop. | Good |
| Abrasion Resist. | Good |
| Gas Permeability | Good |
| Weather Resist. | Excellent |
| Water Resistance | Excellent |
| Ozone Resistance | Excellent |
| Mineral Oil Resist. | Excellent |
| Chemical Resist. | Excellent |
| Flame Resistance | Poor |
| Heat Resistance | Excellent |
Preferred Buyer From
| Location | Worldwide |
NBR is used in the automotive and aeronautical industry to make fuel and oil handling hoses, seals, grommets, and self-sealing fuel tanks. It is used in the nuclear industry to make protective gloves. Its stability at temperatures from −45 to 130 °C makes it an ideal material for aeronautical applications. NBR is more resistant than natural rubber to oils and acids, and has superior strength. High-nitrile HNBR elastomers have better resistance to mineral oils, whereas peroxide/sulphur cured HNBRs have the best compression set and heat resistance.
Sizes :
- ID (mm) : As per Customer Requirement
- Length(mm) : As per Customer Requirement
- No. Hump : As per Customer Requirement
- Wallthickness (mm) : As per Customer Requirement
- Ply : As per Customer Requirement or As per Burst Pressure required
